The ATM-DRUM7 Drum Pack includes a core selection of five microphones specifically engineered for kick, snare and tom drum applications, along with two microphones ideal for drum overhead miking. The ATM-DRUM7 pack gives you a complete set of drum microphones for live performance and home recording.
All of the microphones in the pack – one ATM250 hypercardioid kick drum mic, one ATM650 hypercardioid snare mic, three ATM230 hypercardioid floor/rack tom mics, and two ATM450 cardioid overhead mics – feature a low-profile design for minimum visibility and versatile placement options around the drum kit. They are engineered to handle fast transients and high SPLs, and deliver superior off-axis rejection.
Also included in the package are the specified clamps for each microphone, four 5/8"-27 to 3/8"-16 threaded adapters, and a hard carrying case with a die-cut foam interior to hold all microphones and accessories.
ATM250 Dynamic Element Hypercardioid Polar Pattern Frequency Response: 40-15,000 Hz Open Circuit Sensitivity: -54 dB (1.9 mV) re 1V at 1 Pa Impedance: 600 ohms Integral 3-pin XLRM-type R9 Case Style
ATM650 Dynamic Element Hypercardioid Polar Pattern Frequency Response: 80-17,000 Hz Open Circuit Sensitivity: -56 dB (1.5 mV) re 1V at 1 Pa Impedance: 300 ohms Integral 3-pin XLRM-type T5 Case Style
ATM230 Dynamic Element Hypercardioid Polar Pattern Frequency Response: 30-12,000 Hz Open Circuit Sensitivity: -54 dB (1.9 mV) re 1V at 1 Pa Impedance: 600 ohms Integral 3-pin XLRM-type R2 Case Style
ATM450 Fixed-charge back plate permanently polarized condenser element Cardioid Polar Pattern Frequency Response: 40-20,000 Hz Open Circuit Sensitivity: -41 dB (8.9 mV) re 1V at 1 Pa Impedance: 200 ohms Integral 3-pin XLRM-type S11 Case Style
The Audio-Technica AT8470 Quiet-Flex Microphone Stand Clamp is a sturdy, noise-reducing mic clamp for tapered-body handheld mics. The AT8470's rubbery, pliant material helps shield your microphone from noise when removing or attaching the microphone. It screws on to standard 5/8"-27 threaded microph
The AT8430 Isolation Microphone Clamp provides adequate shock absorption to minimize vibration and surface-born noise. The clamp mounts to any standard microphone stand with a 3/8" stud and features an adjustable, pivoting angle for positioning.
The Audio-Technica AT8428 Tapered Slip-in Microphone Clamp is a standard microphone mount, designed to provide a universal fit for all handheld microphones. The clamp mounts to any standard microphone stand with a 3/8" stud and features an adjustable, pivoting angle for perfect positioning upward or
Quick Mount Stand Adapter for Gooseneck Microphones
The Audio Technica AT8473 is a quick-release stand adapter that permits gooseneck microphones with 18.9 mm base to successfully mount onto standard 5/8"-27 or 3/8-16 threaded stands or mounting flanges.
The AT8647QM/S Microphone Shock Mount Plate is designed to be used with microphones mounted on lecterns, pulpits, conference tables and other surfaces. A suspended rubber panel isolates the microphone from its mounting surface and provides effective reduction of mechanical noise and vibration. A lig
The Audio-Technica AT8468 is a hook-and-loop fabric, touch-fastener mount for mounting lavalier microphones to violins. The AT8468 loops around the strings and secures lavaliers just above the bridge for perfect positioning.
Microphone socket for use with a 21 mm gooseneck or button-style boundary microphone with 3-pin XLRM output. Mounts flush on tabletops. Phantom power only, 11V to 52V DC. External contact closure capability permits control of remote devices from built-in, programmable capacitance switch. Integral bi
The Audio-Technica AT8427 Snap-In Microphone Clamp features a crescent design to provide quick installation and release for all compatible handheld microphones. The clamp mounts to any standard microphone stand with a 3/8" stud and features an adjustable, pivoting angle for positioning.
The AT8646QM is an integrated mount, mute switch and power supply for lectern, pulpit and conference table microphones. The mount features an XLR-female type input and isolated rubber panel that minimizes structure noise. The mount supplies 48V phantom power (via an external source) to condenser mic
The Audio-Technica AT8438 is a simple solution for mounting lavalier and hanging microphones on stands, podiums, pulpits, etc. The mount includes a cylindrical shaft that accommodates the microphone and cable. The mount base provides a standard 5/8"-27 thread for mounting to standard microphone stan
The AT8662 Shock Mount is designed to secure the Audio-Technica Unipoint series gooseneck microphones onto podiums, desktops, etc. The AT8662 effectively minimizes vibration, reflection and surface-born noise.
Audio-Technica's AT8451 Wire Hanger Adapter for Overhead Microphones provides a unique way to position hanging microphones suspended by nothing more than their connecting cable. The Wire Hanger Adapter has two coiled ends: one that cradles your microphone while the other end hugs your cable. In betw
The low-profile AT8666 microphone desk stand allows gooseneck microphones to be quickly mounted in applications not suited for permanent installation. The AT8666RSP comes with a user-programmable switch that offers three settings: press on/press off, momentary on, and momentary off. The AT8666RSC al
The AT8615 is a quick-mount plug-in cast-metal desk stand, with XLR-F in and XLR-M out connectors. The AT8615RS is the same as the AT8615, with the addition of an on/off mute switch for phantom-powered microphones.
The Audio-Technica UniMount Microphone Instrument Mount AT8418 is a simple, microphone clip that offers you the ability to perfectly position your microphone on an instrument. This model includes a rubber-grip spring that prevents marring the finish of your instrument and a flexible boom that allows
The AT8469 Camera Shoe Mount Adapter converts a standard shoe mount into a 5/8"-27 (outside) and 3/8"-16 (inside) threaded base so you can screw on a standard clamps and mounts for microphones or lighting accessories.
The Audio-Technica AT8405a Snap-in Microphone Stand Clamp is a standard microphone mount, designed for 5/8"-27 threaded stands. The AT8405a will accommodate any 0.82" (21mm) diameter microphone and features a pivoting action for accurate placement.
The Audio-Technica AT8407 is a universal spring-loaded microphone clamp. The "clothes pin" clip design accommodates both tapered and cylindrical microphones. The clamp is compatible with 5/8"-27 threaded stands and features a rugged metal base.
The AT8416 is designed to mount flush into desktops, podiums and conference table surfaces to provide adequate noise isolation for gooseneck microphones. The mount features a 5/8"-27 thread stud and is compatible with Audio-Technica adapter-mount and quick-mount gooseneck microphone models.
The AT8154 2-Stage Foam Uniline Windscreen is designed to get right in the game, without getting in the way; a slim boomline catches the entire story, while the 2-stage microphone filters out what's unimportant. The outer shell slows approaching air and any remaining noise is captured by the second-